(267) 389-9644
Elfreth's Alley in Philadelphia: a narrow brick-and-cobblestone lane lined with colonial brick houses

Does my chimney work need Philadelphia Historical Commission approval?

If your house is designated, either on its own or inside a historic district, yes. The Philadelphia Historical Commission's rules treat pointing as an alteration, so repointing or rebuilding a chimney needs review. Routine pointing and like-for-like repairs can usually be approved by Commission staff, often after they look at a mortar sample in the field.

Philly Chimney & Fireplace Repair · November 3, 2026

Pointing counts as an alteration

The Commission's Rules and Regulations (revision of March 12, 2021) define alteration to include reroofing, cleaning and pointing a building. That one word is why a chimney job that would be ordinary maintenance anywhere else needs a sign-off on a designated property.

L&I's building permit page draws the same line from the other side. It says that as long as a property is not on the Philadelphia Register of Historic Places, you often do not need a permit for regular maintenance such as pointing masonry. Once the house is on the register, that shortcut is gone.

Staff review, not always a hearing

Most chimney work never goes before the full Commission. Section 6.10 of the rules lets staff approve standard maintenance, pointing included, and the replacement of deteriorated features when the new work copies the historic appearance. Staff can also approve changes to secondary walls that face an alley or have little visibility from the street.

In practice, the Commission's September 2026 permit log shows repointing approvals with a condition attached: staff review of a masonry pointing sample in the field. Expect someone from the Commission to look at a small test patch before the whole stack is done.

Removing a chimney is a harder sell. In July 2020, the Architectural Committee approved a Porter Street project on the condition that the chimney above the roof was kept, calling it a character-defining feature, and asked that corbelled chimneys on a Wharton Street house be repaired rather than removed.

What the Diamond Street manual says

The Commission published an owner's manual for the Diamond Street Historic District. It is written for that one district, but it shows how staff think about chimneys.

  • Metal B-vents sticking out of chimneys are not approved. The manual suggests terra cotta liners or a metal liner cut below the brick instead.
  • Covering a masonry chimney with tar, cement or stucco is not recommended, and even unused chimneys should be kept in repair and capped.
  • New mortar should match the old in color, texture, tooling and makeup, and be soft enough for the brick.
  • Joints should be raked out by hand, and pointing done only when it stays at 45°F or above for 72 hours.
  • A sample patch is reviewed and approved by staff before the work starts.

Is my house designated?

The City lists its historic districts online, from Society Hill, Old City and Rittenhouse-Fitler to Spring Garden, Powelton Village, Main Street Manayunk, Girard Estate, Parkside and Overbrook Farms. Some single buildings are designated individually, and some areas, such as Jewelers' Row, are listed as under consideration. The surest answer comes from the Commission itself at 215-686-7660.

If you are raising a chimney because a neighbor built higher, L&I's EZ permit standard for chimney and vent extensions says historically designated buildings need the Commission's approval first.

Outside the city

Suburban rules differ by borough. West Chester's HARB design guidelines call historic chimneys significant features and recommend a chimney-brick mortar of 1 part white portland cement, 1 part lime and 5 parts sand. Doylestown's HARB reviews exterior changes visible from a public street. Columbia borough pre-approves repointing done to NPS Preservation Brief 2. Lancaster city's Historical Commission says it does not review roofing or masonry work.

How we help with a designated chimney

The inspection is free. We help you prepare the photos, a mortar sample and a written scope that describes the joints, the brick and the materials, so the staff reviewer can see exactly what is planned. Matching the old mortar while repointing the stack usually falls in the $500–$2,500 range; a rebuild from the roofline $1,000–$3,500. The approval itself is between you and the Commission.

Answers

Follow-up questions

Can I take down my unused chimney in a historic district?

It needs Commission review, and the 2020 Architectural Committee minutes show a preference for keeping chimneys above the roof. Plan on repair and a cap rather than removal.

Do I need a permit as well as Commission approval?

Pointing often needs no L&I permit unless the property is on the historic register. Work that changes the structure, extends the chimney or touches an appliance has its own permit path, and on a designated building the Commission comes first.

Can I run a new furnace vent pipe out the top of my chimney?

The Diamond Street manual says the Commission does not approve metal B-vents sticking out of chimneys and points to a terra cotta liner or a metal liner cut below the brick.

Rooftops of brick row houses in the foreground with the Center City Philadelphia skyline behind, on a sunny day

Schedule

Choose a morning or an afternoon.

Sunday through Friday, arrival between 8 and 11, 11 and 2, or 2 and 5. The look costs nothing, and a person phones you the day before.

Or call (267) 389-9644

Call (267) 389-9644